Skip to main content

Top 5 Reasons For Building Cracks

There are many causes of cracks, anything, from natural causes like the recent tremors to using wrong or inadequate building materials.
Cracks may appear in the walls bricks/block mortar plaster, beam-wall joints, columns –wall joints, slabs, beams, columns, foundations and in many other places.
Much as it’s not a simple task, it’s essential you take any cracks seriously and get assessment done in order to specify their significance.
Most buildings will develop cracks at some point in time during their service life due to the following causes.
1.Poor workmanship
Image result for poor masonry work
Poor mixing of building materials, like cement sand and aggregate will cause cracks in the walls, beams, slabs etc. Normally poor workmanship is as a result of ignorance, carelessness, negligence, lack of proper supervision and many others or worth still a combination of all these.
2.Temperature variations 
Image result for temperature variation building cracks
It’s important to know that most materials tend to expand when subjected to direct sunlight and contract in cooler temperatures this process, and therefore end up causing cracks. The cracks will be severe, especially in thin walls that are exposed to direct sunlight.
3.Structural design
Image result for structural design building cracks
Poor structural design and specifications are another cause of the cracks in concrete works. It’s important that the designer considers all the environmental aspects that include soil (Geotechnical) investigations that will enable the designer to come up with a proper design of the foundation.
Normally, buildings are designed for particular uses, and also to withstand a given measure of weight (loading) for example a building designed as residence will have different structural specifications from the one designed to operate machinery.
4.Lack of (or) poor maintenance
Image result for poor maintenance building cracks
It’s always important to take good care of your house, by doing maintenance works after a lapse of certain periods. This will keep the building intact and also extend their life span.
5.Natural forces
Image result for natural forces building cracks
Earthquakes, tremors like the ones that were experienced in Kampala recently, winds, rains, flooding and many others may cause cracking in the buildings.
There are many other causes and types of cracks in buildings therefore always look out for them and take the necessary actions.

Please note that, the remedies or solutions are not discussed because, of the various technical reasons, and therefore the solutions can be provided by technical people, However knowing the causes will help you to ask some crucial questions, and also have helpful awareness before, during and after the construction of your house.

Comments

Popular posts from this blog

How to repair cracked plaster

1.Assess the Plaster Cracks While covering damaged plaster with drywall is cheaper, materials that are period-authentic maintain the historic integrity of an old house. In addition, the plaster will be more durable. Begin by assessing the cracks and trying to determine possible causes. In this case, there are large cracks that have been repaired previously, as well as mid-size and tiny "spider cracks." Settlement over time is one cause of cracked plaster, but another is key disintegration. This is where the plaster protrudes through the wood lath to create a bond. It can also be caused by poor-quality plaster, water damage or normal wear and tear. 2.Clean Out the Cracks The first step in repairing cracks is cleaning them out. Use a five-way tool or other scraping device. In the case of larger cracks with plaster falling out, remove the damaged plaster to reveal the binding course. Knock old plaster through keys in the lath to establish ...

Reducing roof damping

Few simple steps to reduce roof damping Use a good water proffing liquid  Before applying the coat Clean the surface throughly using wire Brush , remove all small debris And clean remove the dust And then apply one coat of  waterproffing coat. Allow it to completly dry for about 24 hours And then apply one more coat of waterproffing. This has to slove the problem if the problem continouos contact some experts on ......
?max-results=10">More
');
?max-results="+numposts5+"&orderby=published&alt=json-in-script&callback=showrecentposts5\"><\/script>");

Social Networks

Find Us On Facebook

Recent Posts

About us